A&D OP-05 Specifikace stáhnout pdf (Strana 59)

8-3 STANDARD SERIAL OUTPUT (SER. OUT)

The standard serial output is a 20 mA current loop. It is located on the rear panel of the indicator, and is used to connect

a remote indicator or printer. This output does not have a power supply. Therefore, the external unit must supply the

power.

Setting of the standard serial output is done with the general functions, SIF-01 through SIF-03.

CONNECTOR FOR STANDARD SERIAL OUTPUT (INCLUDED WITH THE ACCESSORIES.)

Parts Name Q'ty A&D’s parts Number Description

Connector

1 JA-TCP0576

TCP0576, Hoshi Electric

Setting

SIF- Name Default

Parameter Description

1 Displayed weight

2 Gross

3 Net

4 Tare

5 Gross/Net/Tare

A&D standard format

6 Accumulated weight

7 Accumulated counts

01 Output data 1

Accumulated weight/ Accumulated

counts

Accumulated data

format

1 Stream

2 Auto print

Data

transfer

mode

3 Manual print

1 600 bps

03 Baud rate 2

2 2400 bps

INTERFACE SPECIFICATION

Signal System 20 mA current loop 1=20 mA, 0=0

Data bit 7 bits

Parity bit 1 bit (EVEN)

Stop bit 1 bit

Code used ASCII

Note: When connecting any unit other

than an external indicator or printer

manufactured by A & D, the device

must supply power (active current loop)

or an external power supply must be

used.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 89 90

Komentáře k této Příručce

Žádné komentáře

A&D OP-05 Specifikace Strana 59

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola A&D OP-05